[. . . ] If you click [Cancel], you will not be able to start the installation. Note All supportable music files that exist in the path indicated in the window are automatically loaded to M-crew Server. (1) This Quick Setup Guide explains the preparation needed to enjoy music with TDM-NC1. [. . . ] While the installation is still in progress, do not interrupt the operation or take the CD-ROM out of the CD-ROM drive. For Windows Vista users The "Auto Play" window appears, click [Run setup. exe] to install the program. Then, the "User Account Control" (UAC) window appears, click [Allow]. If you click [Cancel], you will not be able to start the installation. 1 Click to place a check next to the directory path that contains the files to be loaded. Click again to remove checks next to paths that are not to be loaded. Tip Sub-folders of the selected folder are also subject to the AUTO LINK function. 1 2 Click [Enable]. "Enable" or "Disable" appears for each item. If "Disable" appears, click [Enable] repeatedly until "Enable" appears for all status items. TDM-NC1 Operating Instructions/M-crew Server Ver. 2. 5 software CD-ROM Click [Close]. The "Security software Firewall setting guide" window appears automatically. Go to STEP . Continued STEP Make the Security Software Firewall Settings If commercially available anti-virus software is installed on your computer, this setting opens the Firewall. If the security software is not installed on your computer, click [Close] then go to STEP . 2 Install the TDM-NC1. Connect the DIGITAL MEDIA PORT cable of this unit to an AV system (DAV series, etc. ). AV system with DIGITAL MEDIA PORT interface (back panel) Case B: Make the wireless connection 1 Turn on the AV system connected to the unit, and 2 switch the AV system function to DMPORT. Confirm the settings of your wireless system. Check the following items of your wireless LAN router to set the same information for the TDM-NC1. SSID (Wireless Network Name): If your wireless LAN router security is enabled, Wireless Network Key: Tips For details on how to check the wireless LAN router settings, refer to the operation manual of your wireless LAN router. In some case, SSID name and wireless network key numbers/characters are written on the wireless LAN router. Check that your wireless LAN router uses the latest firmware version. For details, refer to the operation manual of your wireless LAN router. STEP Check the Operations 1 Make sure the display message of the unit. The message "Configuring" appears, then "Loading" follows and then disappears. If "SERVER?" appears, go to step 2. Notes If "Check Net" appears, check the network settings in STEP . [. . . ] Refer to "Case C: Wireless connection (setting up by the computer)" in the Operating Instructions. This icon appears when connecting the unit by wireless connection. If no sound is heard, check the following; ­ The connected AV system's volume is zero. [. . . ]